Breadcrumbs

exhaust gaskets

More
24 Feb 2024 18:01 #1 by Matt Gunsch
Replied by Matt Gunsch on topic exhaust gaskets
large cotter pin,

A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook

Please Log in or Create an account to join the conversation.

More
23 Feb 2024 15:49 #2 by Ronald Raty
Replied by Ronald Raty on topic exhaust gaskets
I put a strip of tape over my gaskets until I get the stacks onto the studs, and then pull it out before tightening things up. Or sometimes a piece of string wrapped around the cylinder.

Please Log in or Create an account to join the conversation.

More
23 Feb 2024 15:41 #3 by Morris Pearson
exhaust gaskets was created by Morris Pearson
Anyone have a handy trick to get the exhaust gaskets to stay in place on the cylinder while wiggling the exhaust stack in place. The stacks on my C-85 are a very tight fit and require a lots of wiggling to get in place.

Please Log in or Create an account to join the conversation.

Time to create page: 0.176 seconds
Powered by Kunena Forum