Breadcrumbs

Flight Control Rods Plating

More
24 Feb 2022 18:08 #1 by Matt Gunsch
Replied by Matt Gunsch on topic Flight Control Rods Plating
the rods were painted with the insides coated with boiled linseed oil, the only plating was the hardware, which at that time was silver cad.

A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
The following user(s) said Thank You: Ian Azeredo

Please Log in or Create an account to join the conversation.

More
24 Feb 2022 15:28 #2 by Ian Azeredo
Flight Control Rods Plating was created by Ian Azeredo
New name to this group - I'm in process of doing a full restoration of my 415C.  Does anyone know the plating requirements for the flight control rods and links?  I can do the chemical checks per AC43-4B to figure out what it was, but it would be good to know if anyone knows offhand before I start brewing potions per the guidance.  

Please Log in or Create an account to join the conversation.

Time to create page: 0.082 seconds
Powered by Kunena Forum