Breadcrumbs

product review, Dymo Rhino 4200 label maker

More
05 Jan 2020 22:01 #1 by John Jones
Replied by John Jones on topic product review, Dymo Rhino 4200 label maker
Nice review. A little more elegant than printing labels in a small size and shrinking under a clear shrink tubing.

Please Log in or Create an account to join the conversation.

More
05 Jan 2020 20:28 #2 by Matt Gunsch
product review, Dymo Rhino 4200 label maker was created by Matt Gunsch
product review, if you saw by the previous post I am having issues with the electrical on my coupe, one problem is, nothing is marked, no wire numbers, no nothing. to make life easier in the future I wanted to mark the wires somehow, and the best way is with labels on shrink tubing. Turning to Amazon I found what I was looking for DYMO Rhino 4200 label maker, it prints on various sized labels and material, and it prints on SHRINK TUBING, which is available in 1/4, 3/8, 1/2 and 3/4 inch sizes, a pack of 4 is 20 ft of tubing, and is about $20 for 3rd party product which works great. Now as I chase a wire, it gets a label as to where it is from and where it goes, and if possible 3 labels one at each end and one in the middle. I really like how well it works.
www.amazon.com/DYMO-RHINO-Label-Maker-18...id=1578277449&sr=8-3
www.amazon.com/4-Pack-Replace-18051-Indu...REY00S4TAB1VE5FNQZ9Z

A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.114 seconds
Powered by Kunena Forum