Breadcrumbs

Replace sliding windows

More
10 Jan 2024 08:20 #1 by Jack Pollack
Replied by Jack Pollack on topic Replace sliding windows
Thanks. Very useful!

Please Log in or Create an account to join the conversation.

More
09 Jan 2024 20:04 #2 by Brooks McNew
Replied by Brooks McNew on topic Replace sliding windows
Check out this page www.ercoupe.info/pmwiki.php/Main/SlidingWindows

I followed this to remove my windows and replace the welts. While out I used a plastic polishing kit (very similar to a headlight polishing kit) to clean up the windows and they're now about 95% as good as new. If you replace the welts, my best piece of advice would be to bite the bullet and remove the seat back before you start. You'll save time in the long run and do a better job with the seat back frame out of the way.

Looks like you may be missing the fuselage inner skins. These do a lot to protect the windows.
 
Attachments:

Please Log in or Create an account to join the conversation.

More
05 Jan 2024 19:27 - 05 Jan 2024 19:35 #3 by Warren Hampton
Replied by Warren Hampton on topic Replace sliding windows
Mid/ center of the bow frame where the winds meet. so you workout both at the same spot. And I do have a set of Forney wing we could trade . But I would have to do the inspection on them   Off a '57 F1
Last edit: 05 Jan 2024 19:35 by Warren Hampton. Reason: more to say

Please Log in or Create an account to join the conversation.

More
05 Jan 2024 19:10 - 05 Jan 2024 19:23 #4 by Warren Hampton
Replied by Warren Hampton on topic Replace sliding windows
 NO,NO. The funny thing is, after writhing about the wings Matt Gunsch called me looking for a C85 exhaust pipe. Matt is down there in Glendale and the Wing leader for Reg 8, AP&IA. And because Forney's Wing were all metal you cannot use Fabric on the Forney. Sorry to be the one to tell you that Matts Phone 602-684-7607 Grate guy to get to know.
Last edit: 05 Jan 2024 19:23 by Warren Hampton.

Please Log in or Create an account to join the conversation.

More
05 Jan 2024 17:52 #5 by Jack Pollack
Replied by Jack Pollack on topic Replace sliding windows
Thank you for your quick response.

I'll check on the wings.

Looking at the picture, am I on the right track?

Thanks!
Attachments:

Please Log in or Create an account to join the conversation.

More
05 Jan 2024 16:53 #6 by Warren Hampton
Replied by Warren Hampton on topic Replace sliding windows
Another thing your wings. Forney came with metal wings. I would question if fabric are legal on the Forney.

Please Log in or Create an account to join the conversation.

Time to create page: 0.156 seconds
Powered by Kunena Forum